 |
| |
|
| About Cytec |
|
|
| |
| Cytec
manufactures CONAP® polyurethane
and epoxy potting compounds and polyurethane
and acrylic conformal coatings for electronic
and electrical applications. Cytec’s global
sales and technical service network supports
a wide range of UL, IPC, and MILSPEC approved
products, including recognition to UL 94
V-0, UL 94 5VA, and UL RTI 120°C. Products
in this brochure meet the requirements
of the RoHS directive. Cytec technical
specialists are available to assist you
with new designs, provide production support,
and improve performance and line speed
in existing applications. |
|
 |
|
|
| |
|
CONATHANE®
POLYURETHANE FILLED SYSTEMS |
|
These systems have varying degrees of work
life, viscosity, and hardness for many potting
and encapsulating applications such as modules,
strain sensitive components, transformers,
and coils. This series contains UL RTI 120°C
and UL 94 V-0 recognized systems. All of
these systems exhibit excellent performance
when exposed to adverse environments and
temperature ranges from -65°C to +130°C. |
|
 |
|
|
| |
|
CONAPOXY®/CONACURE®
EPOXY FILLED SYSTEMS |
|
|
| |
These systems have varying degrees of work life,
viscosity, flame retardant ratings, and thermal
conductivity. Systems of note: FR-1047/ EA-87
is UL 94 5VA recognized.
The FR-1800 series is new UL 94 V-O epoxy technology:
FR-1810 is 1:1 mix ratio and exhibits high elongation,
FR-1820 is fast gelling with low exotherm, and
FR-1830 is low viscosity (2,200 cps) for optimum
processing. |
|
| |
|
CONATHANE®
MILITARY
AND HIGH RELIABILITY POLYURETHANE SYSTEMS |
|
|
| |
High reliability systems have excellent hydrolytic
stability, outstanding electrical properties over
a wide temperature
range, excellent thermal shock resistance, low
temperature elasticity, low exotherm, and minimal
shrinkage.
A unique characteristic of this series is acoustical
similarity to sea water, which is an essential
requirement for potting transducers and other
sonic devices. EN-1554 and EN-1556 are qualified
to MIL-M-24041-C. |
|
| |
|
CONAPOXY
EPOXY
UNFILLED SYSTEMS |
|
|
| |
These systems possess low shrinkage, low exotherm,
good thermal shock and electrical properties,
with a
hardness range of 75-90 Shore D. These low viscosity
systems are used for potting and encapsulating
resistors, connectors, solenoids, transformers,
and other electrical devices. |
|
| |
|
CONATHANE
POLYURETHANE UNFILLED SYSTEMS |
|
|
| |
Low viscosity, low durometer polyurethane systems
for potting, casting, embedding, and encapsulation
of electronic circuits, components, and power
devices. Low stress build-up on embedded components,
excellent moisture resistance, and low shrinkage. |
|
| |
|
CONAP
CONFORMAL
COATINGS |
|
|
| |
Polyurethane (Type UR) and Acrylic (Type AR)
coatings for aerospace, automotive, consumer,
industrial and marine applications. Solvent, water
based, and 100% solids systems available. Cytec
products are qualified to
MIL-I-46058-C and IPC-CC 830 standards and recognized
to UL 94 V-O. |
|
|
|
|
